Adhesive Lined heat shrink tubing

adhesive lined heat shrink tubing 1.Shrink ratio: 2:1 2.Produced by co-extrusion of irradiated 3.Operating temperature:-55~12

Adhesive Lined Heat Shrinkable tubing

  

Product Description:

 Manufactured by co-extrusion of irradiated crosslinking polyolefin and specifically disigned hot melt adhesive.

Operating temperature:  -55oC~ 125oCFlame retardant: UL224 VW-1Good in quality and has a competitive priceVarious in design and different color selectionRoHS Compliant: Pass  SGS Report

Application:

This tube can be used in a wide variety of electrical applications,including back end connector sealing,breakouts,and connector to cable transitions. High expansion ratio makes it possible to repair most damaged cable jackets without removing connectors.

Tensile Strength	ISO37	9.0MPa minimum
Ultimate Elongation	ISO37	300% minimum
Specific   Gravity	ISO1183	1.25 maximum
Inner wall adhesive          SPDW to  SP                           SPDW   to Alumnium		150N/25MMminimum   60N/25MMminimum
Heat  Shock	ASTM D2671         (4Hrs at  225°C)	no dripping,cracking or flowing of outer wall
Heat Aging	ISO188                  (168Hrs at 150°C)	no dripping,cracking or flowing of outer wall
Low   temperature Flexibility	ASTM D2671 (4Hrs at -50°C)	no cracking
Electric Strength	IEC 243-1	12KV/MM Minimum
Flammability(Outer wall only)	ASTM 876	Pass
Corrosion	ASTM D2671 (16hrs at 15°C)	no corrosion
Water Absorption	ISO62	0.5% Minimum
Fluid Resistance Tensile Strength  Ultimate Elongation	ISO 1817 ISO37	7map Minimum 300% Minimum